| Streetlight FH101 |
|
Solar-Wind Energy Streetlight FH101
Feature : (reference Ritek website :http://www.riteksolar.com/p2-system1.asp)
l Power Saving
Using HID 70W Lamp, as bright as traditional streetlight.
l Environment Protection
Low heat, low emission of CO2.
l Stability
Using the power of solar and wind. It will avoid the effect of bad climate
l Variety
Can customize the power and shape of lamp.
l High Performance
Using MPPT Charger to improve the charging performance.
l Application
Design for Road, Park, Dike, School and Building, Multi-shape beautiful shape!
FH101 Specification :
|
Item
|
Specification
|
|
Photovoltaic Module
|
type
|
Poly-crystalline
|
|
voltage
|
17.6V
|
|
capacity
|
130W
|
|
Wind Turbine
|
capacity
|
400W
|
|
Solar Power Charger
|
Input
|
0~50Vdc ， MPPT function
|
|
charge
|
3 steps power control
|
|
Output
|
DC 12/24V Max.400W
|
|
Wind Power Charger
|
input
|
0~50Vdc/0~38Vac 3 ψ 3W ， 15Amax
|
|
charge
|
3 steps power control
|
|
output
|
DC 12/24V Max .30A
|
|
Pillar
|
type
|
Diameter 138mm galvanized iron tube, white painting
|
|
Deep Cycle Battery
|
capacity
|
12V 46Ah*3
|
|
type
|
Half-gel deep cycle Pb-Acid Battery
|
|
lamp
|
type
|
70W HID Ballast IP65
|
Basic components of Solar Streetlight :
|
Item
|
Specification
|
|
Photovoltaic Module
|
type
|
Poly-crystalline
|
|
voltage
|
17.6V
|
|
capacity
|
130W
|
|
Solar Power Charger
|
Input
|
0~50Vdc ， MPPT function
|
|
charge
|
3 steps power control
|
|
Output
|
DC 12/24V Max.400W
|
|
Pillar
|
type
|
• Modify from standard streetlight
• Can customized
• 5 M high
|
|
Deep Cycle Battery
|
capacity
|
12V 46Ah*3
|
|
type
|
Half-gel deep cycle Pb-Acid Battery
|
Special Recommended Option : LL001 High Bright LED Lamp :
|
No.
|
Item
|
Specification
|
|
1
|
View Angle
|
110 。 ~ 120 。
|
|
2
|
Power Consumption
|
110V/ 0.55A ~220V/ 0.28A
|
|
3
|
Voltage
|
AC100V~240V(50Hz/60Hz)
|
|
4
|
Color Temp.
|
White:6,000K; amber: 3,000K~3,500K
|
|
5
|
Operation Environment
|
Temperature: -20 ℃ ~ 50 ℃
Humidity:80 ψ± 5
|
|
6
|
Luminous Flux
|
2,400 lm~2600 lm
|
|
7
|
Lamp Material
|
Housing: Aluminum Alloy
TMA: heat-resistant potassium glass
|
|
8
|
Life Cycle
|
50,000hs
|
Lamp Standard：
|
l It conforms to the standards of IES(Illuminating Engineering Society of North America) and CIE(Commission Internationale de l´Eclairage).
|
|
l It passed the test of ITRI(Industrial Technology Research Institute). The temperature of lamp is less than 55℃. It is suitable for the 6M wide road or 5M high streetlight.
|
|
 |
| |
| Streetlight FH102 |
|
Solar-Wind Energy Streetlight FH102
Feature : (reference Ritek website :http://www.riteksolar.com/p2-system2.asp)
l Power Saving
Using HID 70W Lamp, as bright as traditional streetlight.
l Environment Protection
Low heat, low emission of CO2.
l Stability
Using the power of solar and wind. It will avoid the effect of bad climate
l Variety
Can customize the power and shape of lamp.
l High Performance
Using MPPT Charger to improve the charging performance.
l Application
Design for Road, Park, Dike, School and Building, Multi-shape beautiful shape!
FH102 Specification :
|
Item
|
Specification
|
|
Photovoltaic Module
|
type
|
Poly-crystalline
|
|
voltage
|
17.6V
|
|
capacity
|
130W
|
|
Wind Turbine
|
capacity
|
400W
|
|
Solar Power Charger
|
Input
|
0~50Vdc ， MPPT function
|
|
charge
|
3 steps power control
|
|
Output
|
DC 12/24V Max.400W
|
|
Wind Power Charger
|
input
|
0~50Vdc/0~38Vac 3 ψ 3W ， 15Amax
|
|
charge
|
3 steps power control
|
|
output
|
DC 12/24V Max .30A
|
|
Pillar
|
type
|
Diameter 138mm galvanized iron tube, white painting
|
|
Deep Cycle Battery
|
capacity
|
12V 50Ah*3
|
|
type
|
Half-gel deep cycle Pb-Acid Battery
|
|
lamp
|
type
|
60W LED，IP65
|
Special Recommended Option : LL001 High Bright LED Lamp :
|
No.
|
Item
|
Specification
|
|
1
|
View Angle
|
110 。 ~ 120 。
|
|
2
|
Power Consumption
|
110V/ 0.55A ~220V/ 0.28A
|
|
3
|
Voltage
|
AC100V~240V(50Hz/60Hz)
|
|
4
|
Color Temp.
|
White:6,000K; amber: 3,000K~3,500K
|
|
5
|
Operation Environment
|
Temperature: -20 ℃ ~ 50 ℃
Humidity:80 ψ± 5
|
|
6
|
Luminous Flux
|
2,400 lm~2600 lm
|
|
7
|
Lamp Material
|
Housing: Aluminum Alloy
TMA: heat-resistant potassium glass
|
|
8
|
Life Cycle
|
50,000hs
|
|
 |
Lamp Standard：
|
l It conforms to the standards of IES(Illuminating Engineering Society of North America) and CIE(Commission Internationale de l´Eclairage).
|
|
l It passed the test of ITRI(Industrial Technology Research Institute). The temperature of lamp is less than 55℃. It is suitable for the 6M wide road or 5M high streetlight.
|
|
|
| |
| Small Home System |
|
Solar-Small Home System :
Feature :(reference Ritek website :http://www.riteksolar.com/p2-system3.asp)
|
1.Easy to install & un-stall
|
|
2.Economic in cost
|
|
3.Generate power from solar energy
|
|
4.Store the energy to batteries
|
|
5.Output power in AC110V/220V and other interfaces
|
|
 |
Application :
1.For campers
2.For outlying houses that is no power supply
3.For people preparing for emergency
Components :
1.Power Converter (Includes charger, inverter, interfaces, etc.)
2.Photovoltaic Module
3.Rechargeable Battery
4.Electric Cord (Optional)
5.Frame (Optional)
SHS Power Converter Specification :
Weight : 1Kg.
Size: 260*220*100 mm
Charging Specification :
|
Item
|
Specification
|
|
Solar Voltage
|
6~50V
|
|
Solar Charging Current
|
0~6A
|
|
Max. Charging Efficiency
|
>85%
|
|
MPPT Charging Efficiency
|
>95%
|
|
Charging Mode
|
CV/CC/Floating
|
|
Protection
|
Over Voltage/ Over Current
|
|
Max. Open Circuit Voltage
|
50VDC
|
|
Max. Charging Current
|
6A
|
|
Recommend Solar Module
|
40W *1
|
|
Max. Solar Module Support
|
80W
|
Discharging Specification :
|
Item
|
Specification
|
|
Discharging Voltage of Batteries
|
12V
|
|
Output Wave Form
|
Modified Sine Wave
|
|
Max. Output Power
|
150W
|
|
AC Output Voltage
|
110V
|
|
DC Output Voltage 1
|
12V Car Socket
|
|
DC Output Voltage 2
|
12V Connectors *1
|
|
DC Output Voltage 3
|
5V USB *2
|
|
Recommend
|
20Ah@12V
|
|
Max. Battery Support
|
<60Ah@12V
|
|
|
| |
| Component-RS001 |
|
Solar Power Charger with MPPT Function :
Feature :(reference Ritek website :http://www.riteksolar.com/p2-system4.asp)
|
1. The charger offers many possibilities solar cell like single-crystal, multi-crystal...etc.
2. Also provides wide input voltage range about 6 to 50 volt.
3. High Efficiency Maximum Power Point Tracking Technique.
4. Design battery management function for long life-time.
5. ABM 3-stages Battery Charging/Discharging Control.
6. Certification: FCC part 15 subpart B / EN 61000-6-3, EN61000-6-1, EN61000-4-2, EN55022
7. Protection: Over voltage, current , battery low and surge.
8. Smart Load Management: Automatically detecting can be recognized day and night.
9. A smart load management function with switch of 16 steps, as below figure
|
 |
Load Management Function :
|
Solar Power Charger with MPPT Function
|
|
Model
|
RS001-SCHG12100
|
RS001-SCHG24200
|
|
Rated Power
|
75W
|
150W
|
|
Solar Panel Voltage
|
6~50V
|
|
Rated Input Current
|
7A
|
|
Charging Start/Stop Voltage
|
5V
|
|
MPPT Efficiency
|
>95%
|
|
Max. Charger Efficiency
|
>90%
|
|
Battery Voltage
|
12V
|
24V
|
|
Battery Low Shutdown
|
11V
|
21V
|
|
Battery Protection Voltage
|
14.4V
|
28.8V
|
|
Charging Current
|
7A
|
|
Load Current
|
7Amax
|
|
Load Management
|
16 Segment
|
|
Size(L×W×H) mm
|
113 × 98 × 50
|
|
Weight
|
0.6Kg
|
|
|
|
|
| |
| Component-RS002 |
|
Solar Power Charger with MPPT Function :
Feature :(reference Ritek website :http://www.riteksolar.com/p2-system5.asp)
|
1. The charger offers many possibilities solar cell like single-crystal, multi-crystal...etc.
2. Also provides wide input voltage range about 5 to 50 volt.
3. High Efficiency Maximum Power Point Tracking Technique.
4. Design battery management function for long life-time, the battery capacity can be used with 50/100/150/200Ah.
5. ABM 3-stages Battery Charging/Discharging Control.
6. Certification: FCC part 15 subpart B / EN 61000-6-3, EN61000-6-1, EN61000-4-2, EN55022
7. Protection: Over voltage, current , battery low and surge.
8. There is data logger on the LCD display provides input, output or fault alarms information.
9. Smart Load Management: Automatically detecting can be recognized day and night.
10. A smart load management function with switch of 16 steps, as below figure
|
 |
Load Management Function :
Spectificaiton :
|
Solar Power Charger with MPPT Function
|
|
Model
|
RS002-SCHG12200
|
RS002-SCHG24400
|
|
Rated Power
|
200W
|
400W
|
|
Solar Panel Voltage
|
5~50V
|
|
Rated Input Current
|
15A
|
|
Charging Start/Stop Voltage
|
6V/5V
|
|
MPPT Efficiency
|
>95%
|
|
Max. Charger Efficiency
|
>90%
|
|
Battery Voltage
|
12V
|
24V
|
|
Battery Low Shutdown
|
11V
|
21V
|
|
Battery Protection Voltage
|
14.4V
|
28.8V
|
|
Charging Current
|
5A/10A/15A/20A (Adjustable)
|
|
Load Current
|
16Amax
|
|
Load Management
|
16 Segment
|
|
Size(L×W×H) mm
|
200×142×52
|
|
Weight
|
1.5 Kg
|
|
|
|
|
| |
| Component-RW001 |
|
Wind power Charger with MPPT Function :
Feature :(reference Ritek website :http://www.riteksolar.com/p2-system6.asp)
|
1. The RW001 offers Low-wind speed (<3m/sec) starting while input voltage about DC 6 volt.
2. High Efficiency Maximum Power Point Tracking Technique.
3. Wind-speed monitoring and over speed breaking at 12.5m/sec, it's absolutely protection for wind turbine units.
4. Automatically detecting can be recognized day and night.(Extenal Cds sensor)
5. Design battery management function for long life-time.
6. ABM 3-stages Battery Charging/Discharging Control.
7. Protection: Over speed, voltage, current , battery low and surge.
8. A smart load management function with switch of 16 steps, as below figure
|
 |
Load Management Function :
Spectificaiton :
|
Windpower Charger with MPPT Function Specifications
|
|
Model
|
RW001-WCHG12400
|
RW001-WCHG24400
|
|
Rated Output Power
|
400W
|
400W
|
|
Input Voltage
|
12V
|
24V
|
|
Charging Start/Stop Voltage
|
6V/5V
|
6V/5V
|
|
InputVoltageRange
|
5~36Vrms
|
5~36Vrms
|
|
Rated Input Current
|
15A
|
15A
|
|
MPPT Efficiency
|
>95%
|
>95%
|
|
Charger Efficiency
|
>85%, max.92%
|
>85%, max.92%
|
|
Battery Low Shutdown
|
11V
|
22V
|
|
Battery Protection Voltage
|
14.4V
|
28.8V
|
|
Rated Load Current
|
16Amax
|
16Amax
|
|
Load Management
|
16 Seg.
|
16 Seg.
|
|
Over-Speed Braking
|
15m/sec
|
15m/sec
|
|
Size(L*W*H) mm
|
202*142*52
|
202*142*52
|
|
Weight
|
1.5 Kgs
|
1.5 Kgs
|
|
|
|
|
| |
| Component-IG001 |
|
DSP Based Grid-tied PV Inverter :
Feature :(reference Ritek website :http://www.riteksolar.com/p2-system7.asp)
|
1. Rated Power: 1-4kW
2. Grid-connected PV Inverter with Sinusoidal Supply Current
3. DSP-controlled Line Interactive PV Inverter
4. Single-stage Power Conversion
5. Solar Input Voltage (Nominal) 150-450V
6. Output AC Voltage 198-242VAC
7. Output Frequency 50/60 Hz Auto-detection
8. Maximum Efficiency > 96%
9. Output Current THD < 5%
10. LCD Display for Power Generation
11. RS-232 & TCP/IP Remote Monitoring
|
 |
Remote Monitoring and Control :
- Total amount of kWh delivered to the grid ever since the inverter was manufactured
- PV Inverter Internal temperature of the inverter
- Watts AC into the grid
- Grid voltage & current
- DC panel voltage & current
|
Specifications :
|
Model
|
IG001-PV21200D
|
IG001-PV22200D
|
IG001-PV24400
|
|
DSP Fully Digital-Controlled Grid-tie PV Inverter
|
|
Output power
|
1000W
|
2000W
|
4000W
|
|
Maximum power
|
1200W
|
2200W
|
4400W
|
|
Input
|
|
Nominal DC voltage
|
360VDC
|
|
Maximum PV open voltage
|
450VDC
|
|
MPPT range
|
150 to 450 VDC
|
|
Working range
|
150V±5% ~ 450V±5%
|
|
Max. input current
|
10A
|
15A
|
20A
|
|
Output
|
|
Operational voltage
|
198 to 242 VAC
|
|
Operational frequency
|
50/60Hz
|
|
Power factor
|
>0.99 @ Full-Load
|
|
Current distortion
|
<5%
|
|
Maximum Efficiency
|
>96%
|
|
Anti-Islanding
|
Meet VDE0126-1-1:2006
|
|
Environment
|
|
Operation temperature
|
-20 to 40°C
|
|
Humidity
|
0 to 95%, non-condensing
|
|
Heat Dissipation
|
Convection
|
|
Acoustic noise level
|
<40dB,A-weighted
|
|
Communication & features
|
RS-232 standard, TCP/IP optional
|
|
Mechanical
|
|
WHD (mm)
|
360*465*150
|
360*465*150
|
360*465*150
|
|
Weight (kg)
|
15kg
|
15kg
|
15kg
|
|
|
|
|
| |
 |
|
