Solar-Wind Energy Streetlight FH101

Feature : (reference Ritek website :http://www.riteksolar.com/p2-system1.asp)

Solar-Wind Energy Streetlight FH102

Feature : (reference Ritek website :http://www.riteksolar.com/p2-system2.asp)

FH102 Specification :

Item		Specification
Photovoltaic Module	type	Poly-crystalline
	voltage	17.6V
	capacity	130W
Wind Turbine	capacity	400W
Solar Power Charger	Input	0~50Vdc ， MPPT function
	charge	3 steps power control
	Output	DC 12/24V Max.400W
Wind Power Charger	input	0~50Vdc/0~38Vac 3 ψ 3W ， 15Amax
	charge	3 steps power control
	output	DC 12/24V Max .30A
Pillar	type	Diameter 138mm galvanized iron tube, white painting
Deep Cycle Battery	capacity	12V 50Ah*3
	type	Half-gel deep cycle Pb-Acid Battery
lamp	type	60W LED，IP65

Special Recommended Option : LL001 High Bright LED Lamp :

No. Item Specification 1 View Angle 110 。 ~ 120 。 2 Power Consumption 110V/ 0.55A ~220V/ 0.28A 3 Voltage AC100V~240V(50Hz/60Hz) 4 Color Temp. White:6,000K; amber: 3,000K~3,500K 5 Operation Environment Temperature: -20 ℃ ~ 50 ℃ Humidity:80 ψ± 5 6 Luminous Flux 2,400 lm~2600 lm 7 Lamp Material Housing: Aluminum Alloy TMA: heat-resistant potassium glass 8 Life Cycle 50,000hs

Lamp Standard：

l          It conforms to the standards of IES(Illuminating Engineering Society of North America) and CIE(Commission Internationale de l´Eclairage).

l          It passed the test of ITRI(Industrial Technology Research Institute). The temperature of lamp is less than 55℃. It is suitable for the 6M wide road or 5M high streetlight.

Solar-Small Home System :

Feature :(reference Ritek website :http://www.riteksolar.com/p2-system3.asp)

1.Easy to install & un-stall 2.Economic in cost 3.Generate power from solar energy 4.Store the energy to batteries 5.Output power in AC110V/220V and  other interfaces

Application :

 Components : 

SHS Power Converter Specification :

                Weight : 1Kg.
               Size: 260*220*100 mm

Charging Specification :

Item	Specification
Solar Voltage	6~50V
Solar Charging Current	0~6A
Max. Charging Efficiency	>85%
MPPT Charging Efficiency	>95%
Charging Mode	CV/CC/Floating
Protection	Over Voltage/ Over Current
Max. Open Circuit Voltage	50VDC
Max. Charging Current	6A
Recommend Solar Module	40W *1
Max. Solar Module Support	80W

Discharging Specification :

Item	Specification
Discharging Voltage of Batteries	12V
Output Wave Form	Modified Sine Wave
Max. Output Power	150W
AC Output Voltage	110V
DC Output Voltage 1	12V Car Socket
DC Output Voltage 2	12V Connectors *1
DC Output Voltage 3	5V USB *2
Recommend	20Ah@12V
Max. Battery Support	<60Ah@12V

   

Solar Power Charger with MPPT Function :

Feature :(reference Ritek website :http://www.riteksolar.com/p2-system4.asp)

1. The charger offers many possibilities solar cell possibilities such as single-crystal, multi-crystal...etc. 2. Provides wide input voltage range, about 6 to 50 volt. 3. High Efficiency Maximum Power Point Tracking Technique. 4. Design battery management function for long life-time. 5. ABM 3-stages Battery Charging/Discharging Control. 6. Certification: FCC part 15 subpart B / EN 61000-6-3, EN61000-6-1, EN61000-4-2, EN55022 7. Protection: Over voltage, current, battery low and surge. 8. Smart Load Management: Automatically detecting can be recognized day and night. 9. A smart load management function with 16 mode switch, as seen in figure below

Load Management Function :

Solar Power Charger with MPPT Function Model RS001-SCHG12100 RS001-SCHG24200 Rated Power 75W 150W Solar Panel Voltage 6~50V Rated Input Current 7A Charging Start/Stop Voltage 5V MPPT Efficiency >95% Max. Charger Efficiency >90% Battery Voltage 12V 24V Battery Low Shutdown 11V 21V Battery Protection Voltage 14.4V 28.8V Charging Current 7A Load Current 7Amax Load Management 16 Segment Size(L×W×H) mm 113 × 98 × 50 Weight 0.6Kg

Solar Power Charger with MPPT Function :

Feature :(reference Ritek website :http://www.riteksolar.com/p2-system5.asp)

1. The charger offers many solar cell possibilities, such as single-crystal, multi-crystal...etc. 2. Provides wide input voltage range, 5 to 50 volt. 3. High Efficiency Maximum Power Point Tracking Technique. 4. Design battery management function for long life-time, the battery capacity can be used with 50/100/150/200Ah. 5. ABM 3-stages Battery Charging/Discharging Control. 6. Certification: FCC part 15 subpart B / EN 61000-6-3, EN61000-6-1, EN61000-4-2, EN55022 7. Protection: Over voltage, current , battery low and surge. 8. There is data logger on the LCD display provides input, output or fault alarms information. 9. Smart Load Management: Automatically detecting can be recognized day and night. 10. A smart load management function with 16 mode switch, as seen in figure below

Load Management Function :

Spectificaiton :

Solar Power Charger with MPPT Function Model RS002-SCHG12200 RS002-SCHG24400 Rated Power 200W 400W Solar Panel Voltage 5~50V Rated Input Current 15A Charging Start/Stop Voltage 6V/5V MPPT Efficiency >95% Max. Charger Efficiency >90% Battery Voltage 12V 24V Battery Low Shutdown 11V 21V Battery Protection Voltage 14.4V 28.8V Charging Current 5A/10A/15A/20A (Adjustable) Load Current 16Amax Load Management 16 Segment Size(L×W×H) mm 200×142×52 Weight 1.5 Kg

Wind power Charger with MPPT Function :

Feature :(reference Ritek website :http://www.riteksolar.com/p2-system6.asp)

1. The RW001 offers Low-wind speed (<3m/sec) starting while input voltage about DC 6 volt. 2. High Efficiency Maximum Power Point Tracking Technique. 3. Wind-speed monitoring and over speed breaking at 12.5m/sec, it's absolutely protection for wind turbine units. 4. Automatically detecting can be recognized day and night.(Extenal Cds sensor) 5. Battery management function for long life-time. 6. ABM 3-stages Battery Charging/Discharging Control. 7. Protection: Over speed, voltage, current , battery low and surge. 8. A smart load management function with 16 mode switch, as seen in figure below

Load Management Function :

Spectificaiton :

Windpower Charger with MPPT Function Specifications Model RW001-WCHG12400 RW001-WCHG24400 Rated Output Power 400W 400W Input Voltage 12V 24V Charging Start/Stop Voltage 6V/5V 6V/5V InputVoltageRange 5~36Vrms 5~36Vrms Rated Input Current 15A 15A MPPT Efficiency >95% >95% Charger Efficiency >85%, max.92% >85%, max.92% Battery Low Shutdown 11V 22V Battery Protection Voltage 14.4V 28.8V Rated Load Current 16Amax 16Amax Load Management 16 Seg. 16 Seg. Over-Speed Braking 15m/sec 15m/sec Size(L*W*H) mm 202*142*52 202*142*52 Weight 1.5 Kgs 1.5 Kgs

DSP Based Grid-tied PV Inverter :

Feature :(reference Ritek website :http://www.riteksolar.com/p2-system7.asp)

1. Rated Power: 1-4kW 2. Grid-connected PV Inverter with Sinusoidal Supply Current 3. DSP-controlled Line Interactive PV Inverter 4. Single-stage Power Conversion 5. Solar Input Voltage (Nominal) 150-450V 6. Output AC Voltage 198-242VAC 7. Output Frequency 50/60 Hz Auto-detection 8. Maximum Efficiency > 96%  9. Output Current THD < 5% 10. LCD Display for Power Generation 11. RS-232 & TCP/IP Remote Monitoring

Remote Monitoring and Control :

Total amount of kWh delivered to the grid ever since the inverter was manufactured PV Inverter Internal temperature of the inverter Watts AC into the grid Grid voltage & current DC panel voltage & current

 Specifications :

Model IG001-PV21200D IG001-PV22200D IG001-PV24400 DSP Fully Digital-Controlled Grid-tie PV Inverter Output power 1000W 2000W 4000W Maximum power 1200W 2200W 4400W Input Nominal DC voltage 360VDC Maximum PV open voltage 450VDC MPPT range 150 to 450 VDC Working range 150V±5% ~ 450V±5% Max. input current 10A 15A 20A Output Operational voltage 198 to 242 VAC Operational frequency 50/60Hz Power factor >0.99 @ Full-Load Current distortion <5% Maximum Efficiency >96% Anti-Islanding Meet VDE0126-1-1:2006 Environment Operation temperature -20 to 40°C Humidity 0 to 95%, non-condensing Heat Dissipation Convection Acoustic noise level <40dB,A-weighted Communication & features RS-232 standard, TCP/IP optional Mechanical WHD (mm) 360*465*150 360*465*150 360*465*150 Weight (kg) 15kg 15kg 15kg